Description of Drip Edge Roll Forming Machine

• Provides protection and coverage for the roof edge.
• Channels runoff directly into the gutters.
• Suitable for both new constructions and re roofing projects.
• Installed along the gutter line of the roof edge.
• Serves as a starter strip, ensuring shingles are properly aligned.
• The face features a kick out at the bottom to divert rainwater away from the fascia board, reducing the risk of rot.
• Made from standard gauge material with a 5/8 inch overhang included in the face size.

Advantages of Drip Edges:

Water Management: Drip edges effectively direct water from the roof into the drainage system, preventing pooling or seepage beneath the eaves and protecting the building’s structure from potential water damage.

Corrosion Prevention: By preventing water from cascading off the roof edge onto exterior walls or foundations, drip edges reduce moisture exposure, thereby lowering the risk of corrosion.

Support for Roof Structure: Drip edges aid in redirecting water away from the roof’s edge, decreasing water pressure at the eaves and reducing stress on the roof, which can extend its lifespan.

Enhanced Aesthetics: Drip edges contribute to the visual appeal of the roof edge, providing a cleaner appearance that enhances the overall look of the building.

Ice and Snow Mitigation: In colder regions, drip edges play a crucial role in preventing the accumulation of ice and snow at the roof’s edge, reducing load and potential damage to the roof while promoting safety.

Profile Drawing:

Metal Drip Edge continues to provide the best fast-track, flexible, and financially-effective solution for roof edge in steel-work construction.

ZHONGTUO Drip Edge Machine Services providing a solution for all roof edge requirements, including concreting on metal Drip Edge and roof Drip Edge machine.

ZHONGTUO Machinery provides metal Drip Edge machines, ZHONGTUO Machinery is also capable of manufacturing other types of metal Drip Edge roll forming machines, such as the Drip Edge D3 Rake Edge,D4 Rake Edge,E3 Roofers Angle,E4 Roofers Angle,E6 Roofers Angle,E8 Roofers Angle and among others.

In addition, we specialize in:

• C3 Drip Edge
• CS4 Drip Edge
• C3 1/2 Drip Edge
• C4 Drip Edge
• C4 1/2 Drip Edge
• C5 Drip Edge
• C5 1/2 Drip Edge

If you have any interest in these machines, please don’t hesitate to contact ZHONGTUO Machinery for more information.

Roof drip edges are available in nearly fifty different profiles, sizes, and shapes to accommodate various roof types, slopes, and other specific roofing needs.

If you need to replace or install a drip edge on an existing roof, it’s certainly achievable. Here’s a step-by-step guide:

Step One: Carefully lift the shingles along the roof’s edge to identify the nails securing the current drip edge.

Step Two: Use a flat pry bar and hammer to gently remove the nails from the drip edge.

Step Three: Once the drip edge is detached, slide it out and dispose of it properly.

Step Four: Install the new drip edge, ensuring to use roofing cement and nails, while having another professional hold the shingles in place.

Before proceeding, check local building codes for any specific requirements regarding drip edge replacements.

Historically, many building codes didn’t mandate drip edges, but the roofing industry has recognized their importance in enhancing roof performance. Properly installed drip edges contribute significantly to a more effective roofing system.

 

If you find that your roof lacks a drip edge or has one that’s damaged, consider reaching out to a roofing contractor via our Roofing Contractor Locator for expert guidance.

Drip Edge Roll Forming Machine working flow:

Despoiler-Feeding Material-Roll Forming-Servo Cutting-Automatic s tacker

The Technical Specifications Of The Drip Edge Roll Forming Machine Rolling Forming Machine：

Drip Edge rolling forming machine
Series	Details	Parameter	Comment
Material	Raw material	Steel	Customer confirmed
	Material thickness	0.4-0.6 mm
Decoiler	Structure	Manual passive type	The standard one to match the production line
		Single head type
	Loading capacity	2.5 Tons
	Coil inner diameter	450-550 mm
Roll forming machine	Guiding device	Placed on the machine by seller
	Rolling shaft material	45# STEEL
	Shaft diameter	50 mm
	Roller material	GB-Cr12
	Rolling station	12 stations
	Work speed	45 m/min
	Machine structure	Vertical memorial arch frame
	Machine basic frame	Steel plate welded
	Bearing	Roller bearing	Famous brand of Harbin
	Work power	7.5 kw
	Transmission	By gear	With cover
	Safety cover	available
	Appearance	Good appearance with no burrs in steel body nor traces of rust or defects in painting. Good electrical and hydraulic cable organization Car painting make the machine more glossy	We confirm each detail can match the standard, ensure the machine is 100% new!
	Decoiler, we can change to hydraulic one if you need.

More pictures of the machine：