Advantage of Slotted Deflection Track Rolling Forming Machine

For optimal control of head-of-wall lateral movement and rotational flexibility, slotted deflection tracks provide a reliable solution for both interior and exterior walls subject to heavy loads or dynamic wind pressures.

These tracks enable the top portion of steel stud walls to “float” within the slotted deflection track legs, allowing for vertical movement due to live loads from the primary structure without transferring compressive forces to the wall studs.

Moreover, the inclusion of slots in the web of the deflection track accommodates horizontal drift, which is essential for meeting seismic design requirements. With 2-1/2″ leg lengths and various web widths, these tracks are easy to install and help minimize material and labor costs.

Standard Slotted Deflection Track Roll Forming Machine Specification ll

• Standard Slotted Track allows up to 1½” of vertical movement
• Custom shapes and slot sizes available
• Custom widths and thicknesses available
• Positive attachment provided for wall strength
• Absorbs head-of-wall and floor extension or compression movement
• Easy installation reduces labor costs

Profile drawing:

The technical specifications of the Slotted Deflection Track Rolling Forming Machine：

ZTRFM Slotted Deflection Track Rolling Forming Machine
NO.	Equipment	Specification
1	Hydraulic Decoiler	(1) Inner Diameter: Ø 460 – 510 MM (2) Loading Capacity: 3000 KGS (3) Automatic Operating Type: Expansion to tighten coil automatically
2	Roll Forming Machine	(1) Quantity Of Rollers: 14 Groups (2) Roller’s Material: Cr12 Steel, Heat Treatment, Quenched (3) Roller’s Surface Treatment: Polished (4) Roller’s Main Shaft: Ø 60 MM, 40 Cr Steel, Quenched & Heat Treatment (5) Bearing: HRB Bearing, Best In China (6) Machine Side Wall: 25 MM (7) Machine Base: Welded By 80 Square Pipe (8) Driving Method: Chain & Gear Or Gearbox (9) Coolant System: Equipped
3	Flying Cut-Off Device	(1) Hydraulic Pump Stand: 1 Set, Auto Start / Stop (2) Hydraulic Cut Modular: 1 Set (3) Modular Material: Cr12Mov (CN Standard) / SKD11 (JP Standard) (4) Length Tolerance: ± 1.0 MM (5) TBI Linear Guideway & Ball Screws: 1 Set (6) Hydraulic Components: Taiwanese (7) Hydraulic Overload Protection Setting: Maxi. & Mini. Pressure, Pump Stand & Forming Machine Stops & Starts, With Wind Coolant System, Filter Function
4	Run-Out Table	/
5	Control System	(1) Controller: Motion Tracing Controller, Single Axis (2) Touchable Screen: 7” Color Screen, WEINVIEW (3) Encoder: Omron, Japanese (4) Button / Knob: Schneider, France (5) Speed Control: Frequency Converter (6) Power Supplier: 380 V, 50 HZ, 3 Phs; Customized

More pictures of the machine：