Delta Rib Description
Delta Rib metal roofing and siding is a light gauge, exposed fastener panel is ideal for residential, light commercial, agriculture, retail, and civic projects. This versatile panel offers architects, homeowners, and building owners new choices. Delta Rib metal roofing and metal siding has a variety of colors to choose from and provides a safer alternative to other traditional building materials.
Profile drawing:
The Delta Rib Roofing Machine offers several advantages for panel specifications:
- Cut to the 1/2″ inch
- Rib Height: ¾”
- Rib Spacing: 8” on-center
- Steel Thickness: 29 gauge at full hard 80k PSI
- Substrate: either Galvalume® or Galvanized
- Anti-siphon laps improve water-tight integrity
- Minimum roof slope: 3:12 pitch
- Delta Rib may be installed directly over purlins; no sheathing necessary
- Panels cut to any manageable length in one inch increments
The technical specifications of the Delta Rib Roofing Machine：
| NO | Name | Specifications |
| 1 | Raw material | Galvanized steel and Pre-painted steel |
| 2 | Raw material thickness | 0.3-0.8mm |
| 3 | Decoiler | 5T Hydraulic decoiler(Different capacity for option,manual one for option) |
| 4 | Roller station | 18 stations |
| 5 | Roller material | 45# steel with quenched treatment |
| 6 | Shaft diameter | 80mm |
| 7 | Shaft material | 45# steel with tempered |
| 8 | Transmission | by gear box transmission |
| 9 | Motor power | 5.5kw motor |
| 10 | Machine frame | 400H steel welded |
| 11 | Cutting type | Hydraulic cutting |
| 12 | Hydraulic power | 5.5kw |
| 14 | Cutting blade material | Cr 12 High Grade Steel |
| 15 | Cutting tolerance | +/-1mm |
| 16 | Control system | PLC |
| 17 | Brand | PLC:Delta/Siemens/Mitsubishi
Touch screen:Delta/Siemens/Mitsubishi Encoder:Omron |
1.Through-fastened Metal Panel with 36″ Net Coverage Th […]
M-Panel Description The M-Panel is a 36-inch wide, expo […]
5V Roll Forming Machine The Roll Forming Machine consi […]
This is the Quad rib panel The Quad-Rib Metal Roofing p […]
STAY IN THE LOOP
